polyswitch? ptc de vices overcurrent protection device product: rge f 800 - 1 document: scd 26393 rev letter: d rev date: july 26 , 2013 page no.: 1 of 2 ? 2016 littelfuse, inc. littel fuse.com specifications are subject to change without notice. revised july 26 , 20 16 specification status: r eleased electrical rating voltage: 16v max current: 100a max insulating material: cured, flame retardant epoxy polymer meets ul94 v - 0 requirements lead material: 20 awg tin plated copper (0.81mm [0.032] nom . diameter) marking: table i. dimensions: a b c d e f min max min max min max min max min max typ mm: 11.7 12.7 16.0 20.9 4.3 5.8 25.4 -- 2.0 3.0 1.2 in*: (0.46) (0.50) (0.6 3 ) (0.8 2 ) (0.17) (0.23) ( 1.00 ) -- (0.08) (0.12) (0.05) *rounded off approximation table ii. performance ratings: i hold rated current current ratings initial resistance values time to trip r 1 max 1 hr. post trip resistance standard trip tripped - state power dissipation amps at 25 ? c amps at 25 ? c oh ms at 25 ? c seconds at 25 ? c, 40.0 a ohms at 25 ? c watts at 25 ? c hold hold trip min max max max typ 8.0 8.0 13.6 0.0056 0.0110 5.0 0.0175 3.0 agency recognitions: ul, csa, tuv. reference documents: ps300 precedence: this specification takes pr ecedence over documents referenced herein. effectivity: reference documents shall be the issue in effect on the date of invitation for bid. caution: operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. mat erials information r ohs co mpliant elv compliant pb - free halogen free* * halogen free refers to: br 900ppm, cl 900ppm, br+cl 1500ppm. hf manufacturers mark lot identification and part identification g 8
polyswitch? ptc de vices overcurrent protection device product: rge f 800 - 1 document: scd 26393 rev letter: d rev date: july 26 , 2013 page no.: 2 of 2 ? 2016 littelfuse, inc. littel fuse.com specifications are subject to change without notice. revised july 26 , 20 16 i nformation furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability of and test each product selected for their own applications. littelfuse products are not desi gned for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, lifesaving, life - sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in wh ich the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in ap plicable li ttelfuse product documentation. warranties granted by littelfuse shall be deemed void for products used for any purpose not expressly set forth in appli cable littelfuse documentation. littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by littelfuse as set forth in ap plicable littelfuse documentation. the sale and use of littelfuse products is subject to littelfuse terms and conditions of sale, unless otherwise agreed by littelfuse .
|
